Electrical Appliances: ))

• length: 5m
• plugs network, angled
• number of sockets: 3
• color: white

• HDMI and Mini-HDMI Cable Tester (type A–A, A–C, C–C)
• Detects breaks, shorts, incorrect wire arrangement, and crossover
• Two operating modes: fast (Fast Scan) and full (Full Display)
• Transmitter + receiver in a compact housing
• Easy one-button operation

• Measurement range 4 × 90° (i.e., full range 360° through four segments of 90°). 
• Resolution +/- 0.05° and accuracy +/- 0.2°. 
• Built-in two laser lines (model E) to assist in the visual alignment of elements. 
• Dual magnetic base (bottom and back) providing stable adhesion to metal surfaces. 
• Built-in Li-ion 1000 mAh battery with USB-C charging, operating time approx. 8 hours.

• Possibility of insulation test voltage: 100 V, 250 V, 500 V, and 1000 V DC. 
• Insulation resistance measurement range: from 0.1 MΩ to even ~10 GΩ for the full range of 1000 V. 
• DC voltage measurement up to 1000 V and AC up to 750 V
• Low resistance (continuity) measurement range from 0.1 Ω to ~999.9 Ω 
• Advanced functions: including polarization index (PI) measurement, dielectric absorption test (DAR), comparative function (COMPARE)
• Clear LCD display with backlight and analog bar (bar graph) 
• Automatic range switching (auto-range), automatic shutdown in case of inactivity

• Measurements at a distance of up to 70 meters
• Measures lengths with an accuracy of +/- 2mm
• Calculates area, volume
• Measurement result on a large display
• Remote distance measurement (Pythagorean method)
• Dual analog level
• Convenient and durable belt case

• 12 V / 24 V battery tester with battery, starting, and charging test functions
• Supports batteries 3–250 Ah, standards CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
• Four-wire technique (Kelvin) – precise measurement, protection against reverse polarity and voltage
• Clear LCD display 128×64; indicators: voltage, resistance, health status/capacity
• Built-in protections, easy to use, EN/CN menu – ready to use with vehicle battery

• Non-contact AC voltage detector: range 24–1000 V (Low), 90–1000 V (High)
• Magnetic field detection (solenoids, coils, relays)
• Indication: LED + buzzer, signal frequency increases when approaching the wire
• LED flashlight and low battery indication
• Resistance: IP67, drops up to 2 m, auto shut-off

• plugs mains
• number of sockets: 2
• color: white
• socket: french type (type E)

• LED voltage measurement indicator
• Phase sequence test
• Single phase voltage detection
• Continuity test
• RCD test
• Polarity detection: positive and negative

• plugs network, angled
• number of sockets: 3 (1x AC, 1x USB-C 20W, 1x USB-A 18W)

• plugs network, angled
• number of sockets: 4 (2x AC, 1x USB-C 15W, 1x USB-A 12W)

• Outlets: 6 AC outlets with switches
• Cable length: 1.4 m
• Maximum power: 3680W
• Color: white-gray

• Outlets: 5 grounded outlets.
• Cable length: 5 m
• Maximum power: 2300 W
• Color: white

• Outlets: 7 outlets (5 grounded outlets, USB-A x1, USB-C x1)
• Cable length: 1.5 m
• Maximum power: 3680W
• Color: white

• Outlets: 7 outlets (5 grounded outlets, USB-A x1, USB-C x1)
• Cable length: 1.5 m
• Maximum power: 3680W
• Color: gray

• Outlets: 5 grounded outlets.
• Cable length: 5 m
• Maximum power: 2300 W
• Color: black

• Outlets: 5 grounded outlets.
• Cable length: 3 m
• Maximum power: 2300 W
• Color: black

• Outlets: 5 grounded outlets.
• Cable length: 1.5 m
• Maximum power: 2300 W
• Color: black

• Plug USA / JAPAN, Australia, UK, EU
• Input: 100–250V~ AC, 50/60Hz, 0.5A
• Maximum load: 10A / 2500W
• Total USB power: 20W
• Charging through one port:
  USB-C1 / C2: 5V 3.0A (15W), 9V 2.22A (20W), 12V 1.67A (20W) 
  USB-A1: 5V 3.0A (15W), 9V 2.0A (18W), 12V 1.5A (18W)
• Multi-port mode: USB-C + USB-A: 5V 3.0A (max. 15W combined)

• Outlets: 5 grounded outlets.
• Cable length: 3 m
• Maximum power: 2300 W
• Color: white

• Outlets: 5 grounded outlets.
• Cable length: 1.5 m
• Maximum power: 2300 W
• Color: white

• Plug USA / JAPAN, Australia, UK, EU
• Input: 100–250V~ AC, 50/60Hz, 1.3A
• Maximum load: 10A / 2500W
• Total USB power: 45W
• Charging through one port:
  USB-A1 / A2: 5 V 2.4 A (12 W)
  USB-C2 / C3: 5 V 3.0 A (15 W) USB-C1: 5 V 3.0 A (15 W), 9 V 3.0 A (27 W), 12 V 3.0 A (36 W), 15 V 3.0 A (45 W), 20 V 2.25 A (45 W)
• Multi-port mode (max. 45 W shared):
  USB-C1: 5 V 2.4 A, 9 V 2.77 A (25 W), 12 V 2.25 A (27 W), 15 V 1.8 A (27 W), 20 V 1.35 A (27 W)
  USB-A1 + A2: 5 V 3.0 A (total 15 W), max. 2.4 A per port
  USB-C2 + C3: 5 V 3.0 A (total 15 W
• Color: white

• Sockets: 1
• Cable length: 20 m
• Maximum power: 2300 W
• Color: orange

• Plug: British 3-pin (type G)
• Socket: universal
• For plugs: type B (American), C (European), F (Schuko), I (Australian), L (Italian)
• Protection level: IP20
• Color: white

• Plug: European (type E)
• Socket: universal
• For plugs: type A (American), B (American), G (British), I (Australian)
• Color: white

• Plug: American (type A)
• Socket: universal
• For plugs: type A (American), B (American), C (European), E (European), F (Schuko), I (Australian), J (Swiss), L (Italian), N (Brazilian)
• Protection level: IP20
• Color: white

• Outlets: 2
• Maximum power: 3680 W
• Color: black
• Water resistance: IP44

• Measurement range: AC voltage 200‑276 V, current up to 20 A, power from 2 to 3680 W, amount of energy consumed 0-999 kWh.
• Convenient and readable LCD display presenting essential data.
• Maximum load: 16 A (3680 W).

• Light intensity measurement range from 0 to 400,000 lx
• Bluetooth module for communication and data transmission 
• Ability to save up to 99 measurement results 
• Ability to rotate the mounted sensor to positions 0°, 90°, 180°, and 270°

• wireless doorbell without unnecessary wires or batteries
• 32 different melodies to choose from
• 4 volume levels - up to 85dB
• range up to 150m

• measurement range: 35..130dB
• frequency range: 31.5Hz - 8KHz

• Easy determination of light intensity
• Precise light sensor on a wire
• Compact and ergonomic design

• optical resolution: 12:1
• Variable emissivity coefficient
• backlit display
• automatic shutdown (battery saving)

• rotational speed measurement
• measurement of the number of revolutions
• range: RPM 10.0 ~ 9999.9 rev/min

• Measurement of wood moisture over a wide range (2-40 %) with a resolution of 0.1 %
• Accuracy ±2 % - sufficient guarantee of result reliability for most control work
• Four categories of wood, ~28 reference species - allows for setting adjustments according to the type of wood
• Temperature compensation - reduces errors resulting from the influence of ambient temperature
• Drop resistance from about 1 meter - greater durability and safety in field use

• DC voltage: 400mV~4~40~400~600V
• AC voltage: 4V~40~400~600V
• resistance: 400Ohm~4kOhm~40~400kOhm~4MOhm~20MOhm
• temperature: -40~300C
• checking circuit continuity

• Power socket with electricity measurement function - voltage, current, power, operating time. 
• Measurement range: voltage ~100‑260 V, current up to 16 A, power up to ~3680 W. 
• Large LCD display + features: monitoring energy cost, CO₂ emissions, elapsed operating time.

• Maximum operating voltage: 1000 V cat. III / 600 V cat. IV
• Load: 10 A
• Standards met: EN 61010-031 A1:200

• Temperature measurement range: from -32 °C to 1100 °C (-25.6 °F to ~2012 °F)
• Measurement accuracy: typically +/- 1.5 °C for the range ≥0 °C. 
• Distance to spot ratio (D:S) is 20 : 1 
• Emissivity (ε) adjustable in the range from 0.1 to 1.0 
• Color EBTN display and a range of measurement modes: MAX/MIN/AVG/DIFF/HOLD, visual and audible high/low temperature alarms. 
• Additional features: display backlight, automatic shut-off, low battery indicator, data logging capability.

• Maximum power measurement (Pmax): 5 - 800 W with a tolerance of +/- (1.0% + 10).

• Current measurement (Imp): 0 - 35 A, +/-(1.5% + 5).

• MPPT voltage measurement (Vmp): 12 - 60 V DC, +/-(1.5% + 5).

• Open circuit voltage measurement (Voc): 12 - 60 V DC.

• Short circuit current measurement (Isc): 0 - 35 A.

• MC4 connectors - provide a safe and quick connection to PV panels.

• MPPT test mode - both manual and automatic.

• Protections: reverse polarity, overvoltage, overcurrent, overheating, power exceedance.

- measurement of AC/DC voltage up to 600V

- measurement of DC current with an accuracy of 0.1uA

- measurement of resistance up to 40M

- checking circuit continuity

- temperature: -10..1000°C

• LED voltage measurement indicator
• Phase sequence test
• Single phase voltage detection
• Circuit continuity test
• RCD test
• Polarity detection: positive and negative

• Pair polarity indicator
• Transmitter continuous output voltage: 8 VDC
• Low battery level indicator
• test: RJ11

• AC/DC voltage up to 600V
• Resistance up to 20MΩ
• AC current up to 100A
• Capacitance of capacitors up to 20mF
• NCV - non-contact voltage detection

• DC voltage: 400mV~4~40~400~600V
• AC voltage: 4V~40~400~600V
• resistance: 400Ohm~4kOhm~40~400kOhm~4MOhm~20MOhm
• temperature: -40~300C
• circuit continuity testing

• Manual range adjustment
• Electric field detection function (NCV)
• Freeze last reading
• Low battery indicator
• Automatic shutdown
• Maximum reading: 2000
• Backlit LCD screen

• Wire Tracker with transmitter and receiver — detects network cables (Ethernet), telephone cables (RJ11), and power cables without removing insulation
• TEST mode for line location + SCAN mode (line check) for diagnosing shorts, breaks, and incorrect wire sequences
• Receiver with antenna, headphone jack, and volume control — ideal for working in noisy conditions
• Detection: shorts, breaks, crossovers, wire sequences; FAST/SLOW modes

• Industrial endoscope with a 4.3″ HD screen (1280×720), real-time image preview
• Flexible camera cable with CMOS sensor, diameter 8 mm, field of view 70°, length 1 m
• 8 LED lights with four-level brightness adjustment — illuminating tight and dark spaces
• IP67 rated housing: dustproof, waterproof, ready to work in tough conditions
• Ergonomic handle, user-friendly interface (English language), image rotation option, zoom, contrast/color mode adjustment
• Powered by a Li-ion battery (3.7 V, 2000 mAh), autonomy ~6 h, charging via USB-C (5 V/1 A), charging indicator

• 6000-count digital multimeter with auto-range and NCV (non-contact voltage detection)
• DC and AC measurement up to 600 V (DC ±0.5 %+3; AC ±0.7 %+3)
• DC/AC current measurement up to 10 A (DC ±1 %+3; AC ±1.2 %+3)
• Resistance measurement (up to 60 MΩ), capacitance (up to ~10 mF), frequency (up to 1 MHz), temperature (–40 °C to 1000 °C)
• Functions: diode test, continuity with buzzer (<10 Ω), backlit LCD, HOLD, overload alarm, auto power off
• Durable housing resistant to drops up to 2 m

• Digital clamp multimeter True RMS for measuring AC current up to 600 A (50–100 Hz)
• DC and AC measurement up to 600 V: DC ±(0.5 % + 2), AC ±(0.8 % + 5)
• Resistance measurement (up to 60 MΩ), capacitance (up to 60 mF), frequency (10 Hz–10 MHz)
• Diode and continuity test with audible alarm (below 10 Ω)
• Autoranging, HOLD, MIN/MAX/REL, backlight, automatic shutdown