Electrical Appliances

• Measurement range 4 × 90° (i.e., full range 360° through four segments of 90°). 
• Resolution +/- 0.05° and accuracy +/- 0.2°. 
• Built-in two laser lines (model E) to assist in the visual alignment of elements. 
• Dual magnetic base (bottom and back) providing stable adhesion to metal surfaces. 
• Built-in Li-ion 1000 mAh battery with USB-C charging, operating time approx. 8 hours.

• Digital clamp multimeter True RMS for measuring AC current up to 600 A (50–100 Hz)
• DC and AC measurement up to 600 V: DC ±(0.5 % + 2), AC ±(0.8 % + 5)
• Resistance measurement (up to 60 MΩ), capacitance (up to 60 mF), frequency (10 Hz–10 MHz)
• Diode and continuity test with audible alarm (below 10 Ω)
• Autoranging, HOLD, MIN/MAX/REL, backlight, automatic shutdown

• AC/DC voltage up to 600V
• Resistance up to 20MΩ
• AC current up to 100A
• Capacitance of capacitors up to 20mF
• NCV - Non-Contact Voltage Punching

• DC Current: 60 A; ±(2%+5)
• AC Current: 60 A; ±(2%+5)
• NCV - non-contact voltage detection

• True RMS digital multimeter for accurate electrical measurements
• Readable backlit LCD display +/- 6000 with analog scale
• Wide measurement range: AC/DC voltage and current, resistance, frequency, temperature, capacitance
• NCV function - non-contact voltage detection
• Additional features: USB for communication, diode and continuity test, MAX/MIN/REL/Hold data

• High-resolution True RMS digital multimeter - for precise electrical measurements
• Large backlit LCD display +/- 22000 with analogue handtip
• Wide measurement range: AC/DC, current, resistance, capacitance, frequency and more
• Additional functions: NCV (non-contact voltage detection), diode and continuity test
• USB & Safety Protection CAT III 1000 V / CAT IV 600 V - Ready for Professional Use

• It measures light intensity up to 199,999 lux with an accuracy of ± (4 % + 8 units). 
• For foot-candles (FC) units: range up to 19,999 FC with an accuracy of ±(5 % + 10 units). 
• Resolution: 1 lux or 1 FC. 
• Sampling: 2 readings per second (2/s). 

• Insulation resistance measurement in ranges up to 100 GΩ at test voltages up to 2500 V. 
• AC and DC voltage measurement - the ranges allow for an initial check that the circuit is energized before the insulation test. 
• Advanced functions: polarity index (PI) measurement, dielectric absorption ratio (DAR) measurement, comparison (COMPARE), time measurement
• Easy-to-read display (LCD with 9999 indications) and bar-graph (29 or more segments)
• Utility functions: auto-range, auto-power-off, low battery indicator.

• Versatility: both simple (2-wire) and full (3-wire) measurement can be used - giving you flexibility in different conditions.
• Wide measuring range (up to 4000 Ω) - allows for use in many types of installations.
• Recording and backlight functions enhance the convenience of working in the field.
• Robust design and extensive set of accessories (auxiliary uprisings, cables) included

- AC/DC voltage measurement up to 600V

- DC current measurement with an accuracy of 0.1uA

- resistance measurement up to 40M

- checking the continuity of the circuit

- temperature: -10..1000°C

• True RMS digital multimeter for precise measurements
• Automatic range selection (Auto Range) and manual mode
• NCV function - non-contact voltage detection
• Clear, backlit LCD display
• Robust construction for professional and service applications

• Voltage Measurement LED Indicator
• Phase Sequence Test
• Single phase voltage detection
• Circuit continuity test
• Test RCD
• Polarity detection: positive and negative

• Professional True RMS digital multimeter with a large LCD display (6000 counts).
• IP65 protection class - dustproof and splash-resistant, durable against drops from 2 m.
• Wide measurement range: voltage (AC/DC up to 600 V), current (up to 20 A), resistance, capacitance, frequency, duty cycle, diode test, and continuity.
• Automatic and manual range selection (auto/manual range).
• Additional features: MIN/MAX, HOLD, PEAK HOLD, backlight, flashlight, settings memory, low battery indicator.
• Safety category: CAT III 600 V.

• Wind speed measurement: up to 30 m/s (108 km/h), with high accuracy
• Ambient temperature measurement: in °C or °F
• Hold function: freeze the result on the screen
• LCD display with backlight – excellent readability even in low light
• Automatic shutdown – energy saving

• Two-in-one functionality – temperature and humidity in one device
• Fast and accurate readings thanks to modern sensors
• Simple interface and backlight – easy to use in any conditions
• Small, lightweight, always at hand
• Great price-to-quality ratio from the brand UNI-T

• 12 V / 24 V battery tester with battery, starting, and charging test functions
• Supports batteries 3–250 Ah, standards CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE
• Four-wire technique (Kelvin) – precise measurement, protection against reverse polarity and voltage
• Clear LCD display 128×64; indicators: voltage, resistance, health status/capacity
• Built-in protections, easy to use, EN/CN menu – ready to use with vehicle battery

• rated voltage: 230 V AC ±10%
• current frequency: 50hz
• testing of residual current devices RCD

• non-contact AC voltage indicator
• Built-in buzzer

• Non-contact AC voltage detector: range 24–1000 V (Low), 90–1000 V (High)
• Magnetic field detection (solenoids, coils, relays)
• Indication: LED + buzzer, signal frequency increases when approaching the wire
• LED flashlight and low battery indication
• Resistance: IP67, drops up to 2 m, auto shut-off

• Safe planning of drilling and installation work
• Multifunctional detection: cables, metals, wood – in one device
• High accuracy and detection depth
• Visual and audible signaling – quick location of hidden objects
• Easy to use, even for people without technical experience