electronic equipment

• Mains socket with electricity measurement function - voltage, current, power, operating time. 
• Measurement range: voltage ~100-260 V, current up to 16 A, power up to ~3680 W. 
• Large LCD display + functions: monitoring energy cost, CO₂ emissions, running time.

• Wire pair polarity indicator
• Continuous transmitter output voltage: 8 VDC
• Low battery indicator
• Test: RJ11

• True RMS Digital Clamp Multimeter for AC current measurement up to 600 A (50-100 Hz)
• DC and AC measurement up to 600 V: DC ±(0.5 % + 2), AC ±(0.8 % + 5)
• Measurement of resistance (up to 60 MΩ), capacitance (up to 60 mF), frequency (10 Hz - 10 MHz)
• Diode and continuity test with acoustic alarm (less than 10 Ω)
• Autoranging, HOLD, MIN/MAX/REL, Backlight, Auto Power Off

• DC current: 60 A; ±(2%+5)
• AC current: 60 A; ±(2%+5)
• NCV - Non-Contact Voltage Punching

• High-resolution True RMS digital multimeter - for precise electrical measurements
• Large backlit LCD display +/- 22000 with analogue handtip
• Wide measurement range: AC/DC, current, resistance, capacitance, frequency and more
• Additional functions: NCV (non-contact voltage detection), diode and continuity test
• USB & Safety Protection CAT III 1000 V / CAT IV 600 V - Ready for Professional Use

• It measures light intensity up to 199,999 lux with an accuracy of ± (4 % + 8 units). 
• For foot-candles (FC) units: range up to 19,999 FC with an accuracy of ±(5 % + 10 units). 
• Resolution: 1 lux or 1 FC. 
• Sampling: 2 readings per second (2/s). 

• Maximum power measurement (Pmax): 5 - 800 W with dockcoolness +/-(1.0% + 10).

• Current measurement(Imp): 0 - 35 A, +/-(1.5% + 5).

• MPPT voltage measurement(Vmp): 12 - 60 V DC, +/-(1.5% + 5).

• OpenCircuit Voltage (Voc) Measurement: 12 - 60 V DC.

• Short-circuit currentmeasurement (Isc): 0 - 35 A.

• MC4 connectors - ensuresafe and fast connection to PV panels.

• MPPT test mode - bothmanual and automatic.

• Protection: reverse polarity, overvoltage, overcurrent, overheating, overpower.

• measurement range: 35..130dB
• Frequency Range: 31.5Hz - 8KHz

- AC/DC voltage measurement up to 600V

- DC current measurement with an accuracy of 0.1uA

- resistance measurement up to 40M

- checking the continuity of the circuit

- temperature: -10..1000°C

• True RMS digital multimeter for precise measurements
• Auto Range and Manual Mode
• NCV function - non-contact voltage detection
• Easy-to-read, backlit LCD display
• Robust design for professional and service applications

• Ultra-portable pen meter form factor – fits in any pocket
• Quick and easy measurement without setting a range
• Ideal for one-handed use
• Built-in probes – no wires to connect
• Very good price-performance ratio

• Measurement of both direct and alternating current
• Built-in battery test – a practical feature for everyone
• Compact, handy, easy to use
• Ideal for home, service and education use

• 6000-count digital multimeter with auto-range and NCV (non-contact voltage detection)
• DC and AC up to 600 V (DC ±0.5 %+3; AC ±0.7 %+3)
• DC/AC current measurement up to 10 A (DC ±1 %+3; AC ±1.2 %+3)
• Measurement of resistance (up to 60 MΩ), capacitance (up to ~10 mF), frequency (up to 1 MHz), temperature (–40 °C to 1000 °C)
• Functions: LED Test, Continuity with Buzzer (<10 Ω), LCD with Backlight, HOLD, Overload Alarm, Auto Off
• Robust housing resistant to drops up to 2 m

• Professional True RMS digital multimeter with large LCD display (6000 counts).
• IP65 protection class - dust and splash resistant, resistant to drops from 2 m.
• Wide measurement range: voltage (AC/DC up to 600 V), current (up to 20 A), resistance, capacitance, frequency, duty cycle, diode and continuity test.
• Automatic and manual range selection (auto/manual range).
• Additional functions: MIN/MAX, HOLD, PEAK HOLD, backlight, flashlight, setting memory, low battery indicator.
• Safety Category: CAT III 600 V

• True RMS measurement – ideal for modern electronics
• Full range of measurements – voltage, current, resistance, temperature, NCV
• High safety category – CAT III / CAT IV
• Automatic functions – time saving and measurement reliability
• Convenient operation, durable design, backlit screen

• Wind speed measurement: up to 30 m/s (108 km/h), with high accuracy
• Ambient temperature measurement: in °C or °F
• Hold function: freeze the score on the screen
• Backlit LCD display – excellent readability even in low light
• Automatic shut-off – energy saving

• Dual-function – temperature and humidity in one device
• Fast and accurate reading thanks to modern sensors
• Simple interface and backlight – easy to use in all conditions
• Small, light, always at hand
• Great value for money from the UNI-T brand

• Maximum operating voltage: 1000 V Cat III / 600 V Cat IV
• Load: 10 A
• Standards met: EN 61010-031 A1:200

• 12V / 24V Battery Tester With Battery Test, Starting And Charging Functions
• Supports 3-250 Ah batteries, CCA, BCI, CA, MCA, JIS, DIN, IEC, EN, SAE standards
• Four-wire technology (Kelvin) – precise measurement, protection against reverse polarity and voltage
• Easy-to-read 128×64 LCD display; Indicators: Voltage, Resistance, Health/Capacity
• Built-in safety features, easy operation, EN/CN menu – ready to use from the vehicle battery

• Compact and lightweight design – convenient to carry in your pocket or tool bag.
• High accuracy of measurements in a wide range of voltages and currents.
• Support USB-A and USB-C in one device.
• The data recording function allows the long-term charging process to be analysed.
• Simple operation – simply connect the tester between the power source and the receiver.

• Supply voltage range: 3V~9V
• Voltage Measurement Accuracy: +/-1%
• Voltage Measurement Resolution: 0.01V
• Current measurement range: 0A~3A
• Current Measurement Resolution: 0.01 A
• USB Device Load Sent Test: 0~9999mAh
• Memory: 10 measurements

• non-contact AC voltage indicator
• Built-in buzzer

• Non-contact AC voltage detector: 24-1000 V (Low), 90-1000 V (High) range
• Magnetic field detection (solenoids, coils, relays)
• Signaling: LED+buzzer, the signal frequency increases when close to the wire
• LED flashlight and low battery indication
• Immunity: IP67, drops up to 2 m, auto-off

• Safe planning of drilling and assembly work
• Multi-Function Detection: Cables, Metals, Wood – All in One Device
• High accuracy and depth of detection
• Visual and audible signaling – quick location of hidden objects
• Easy to use, even for non-technical users