'Car Battery Charger' for 6V / 12V Gel / AGM / Lead-Acid Batteries everActive CBC-4
digital, fully automatic
everActive CBC4 is a universal charger / so-called "smart rectifier" for all types of lead-acid batteries (car batteries, etc.) 6V and 12V, gel / AGM.
NEW DIGITAL TECHNOLOGY means smaller size, greater reliability, greater effectiveness, greater efficiency, lower electricity consumption.
The charger supports most car batteries, gel, AGM available on the market with capacities of 1.2 - 120 Ah.
It has a large, clear LCD display and a built-in voltmeter, allowing for a quick assessment of the charge level of the connected battery.
Straight from a power supply specialist
www.everactive.pl
24 months warranty.
The charger is smart, microprocessor-controlled - after fully charging, it automatically turns off, switching to voltage monitoring mode - 100% safe for any battery.
The effectiveness of our charger is comparable to the charging process in leading, professional devices (even many times more expensive) - using a smart charger does not negatively affect battery life, on the contrary, it extends its lifespan!
The charger is dedicated not only to high-capacity car batteries - thanks to various charging programs, it is also suitable for gel batteries, motorcycle batteries, used on yachts, or batteries for scooters with smaller capacities.
Unlimited possibilities - our charger is equipped with a unique, detachable cable with SAE quick connector. This allows for seamless adaptation of the charger to the existing installation when the included cables with alligator clips and eye terminals are insufficient.
Additional SAE connectors are available separately for sale.
- automatic and reliable battery charge control - after reaching a specified voltage, or a self-drop in charging current,
- voltage monitoring after charging is complete - automatic resumption of charging in case of voltage drop on the battery,
- the charger eliminates the phenomenon of sulfation of batteries that can occur during charging,
- "winter mode" - guarantees full and effective charging of the battery, even in very low ambient temperatures
- "reactivation/resuscitation mode" - special charging mode - in the case of extremely discharged batteries, the charger applies limited charging current in single pulses, until a safe voltage is reached allowing for faster charging - the charger itself decides on the necessity of using this mode,
- detachable cable equipped with SAE quick connector allows for adapting the charger to individual needs, the standard equipment includes alligator clips and eye terminals,
- the charger is equipped with a complete set of protections against short circuits, incorrect pole connections, overheating, overload, overcharging, etc.
The CBC 4 charger is designed for 6V / 12V gel, lead-acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid batteries. Charging is automatic, multi-stage. The charging mode, operation of the charger is indicated on the backlit LCD display.
The first stage is measuring and providing the voltage reading at the battery terminals and determining its type. By pressing the "MODE" button, you must select the charging mode. An assessment of the battery's condition and its possible reactivation (only for heavily discharged cells) is performed - charging with reduced current in single pulses.
The next stage is the main charging - depending on the charging mode 0.8A/3.8A.
Subsequent stages involve monitoring the charging process - as the voltage on the battery increases, the charging current is limited.
In the final phase of charging the current is limited to 0.8A - this is an excellent protection against the phenomenon of "gassing" the battery. After reaching a voltage of 14.4V/14.7V (for 12V batteries) and 7.3V (for 6V batteries), the main charging is completed.
The last stage is the phase of monitoring the voltage on the battery - in the case of leaving the charger connected to the battery for an extended period and the voltage dropping to 12.6V (12V) / 6.3V (6V), the charger activates maintenance charging to prevent further battery discharge.
The first stage is measuring and providing the voltage reading at the battery terminals and determining its type. By pressing the "MODE" button, you must select the charging mode. An assessment of the battery's condition and its possible reactivation (only for heavily discharged cells) is performed - charging with reduced current in single pulses.
The next stage is the main charging - depending on the charging mode 0.8A/3.8A.
Subsequent stages involve monitoring the charging process - as the voltage on the battery increases, the charging current is limited.
In the final phase of charging the current is limited to 0.8A - this is an excellent protection against the phenomenon of "gassing" the battery. After reaching a voltage of 14.4V/14.7V (for 12V batteries) and 7.3V (for 6V batteries), the main charging is completed.
The last stage is the phase of monitoring the voltage on the battery - in the case of leaving the charger connected to the battery for an extended period and the voltage dropping to 12.6V (12V) / 6.3V (6V), the charger activates maintenance charging to prevent further battery discharge.
| Technical Data | |
| Input Voltage | 220-240V AC 50Hz/60Hz |
| Supported Batteries | 6V/12V DC automatic detection gel, lead-acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid |
| Supported Battery Capacities: | 1.2-120Ah for 12V 1.2-14Ah for 6V |
| Efficiency | >75-80% |
| Charging Voltage | 14.4V/14.7V for 12V batteries, 7.3V for 6V batteries |
| Charging Current | 0.8/3.8 [A] |
| Operating Temperature | -10..40°C (power limitation at higher temperatures) |
| Dimensions | 18.3 x 6.8 x 4.7 [cm] |
| Other | AC power cable length approx. 1.5 m, total length of connections (with alligator clips or eyes) approx. 1.5 m |
| Included | everActive CBC-4 automatic charger with eye terminals, user manual PL/EN/DE, connection with alligator clips |
Product Safety Data 6V/12V everActive CBC-4 smart charger
Manufacturer/Responsible entity:
Baltrade sp. z o.o.
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20