Charger ' charger ' for 6V / 12V gel / AGM / lead-acid batteries
everActive CBC-1 in a new, improved version of the V2
digital, fully automatic
everActive CBC1 is a universal buffer charger for all types of 6V and 12V acid batteries (car batteries, etc.), gel batteries / AGM batteries.
NEW DIGITAL TECHNOLOGY means small size, greater reliability, greater effectiveness, greater efficiency, lower electricity consumption.
The charger supports most car, gel and AGM batteries available on the market with capacities above 1.2 Ah.
Despite the relatively low charging current of 1A, the charger allows you to recharge and maintain a full charge even with most car batteries.
Straight from the power industry specialist:
24 months warranty
The charger is smart, controlled by a microprocessor - when fully charged, it automatically shuts down, going into voltage monitoring mode - 100% safe for any battery.
The effectiveness of our charger is comparable to the charging process in leading, professional devices (even many times more expensive) - the use of a smart charger does not adversely affect the operation of the battery, on the contrary, with regular use, it effectively extends its life.
The charger is suitable for a variety of batteries with different capacities - it is also suitable for gel batteries, motorcycle batteries, yacht batteries or scooter batteries with a smaller capacity.
Unlimited possibilities - our charger is equipped with a unique, detachable cable with a SAE quick connector. This allows the charger to be easily adapted to your installation when the included cables with alligator clips and ring terminals are insufficient.
Additional SAE connectors are available separately.
The charger uses modern solutions:
- the latest SMD technology - the microprocessor and all components are enclosed in a miniature, very neat housing,
- the charger eliminates the phenomenon of battery sulphation, which may occur during charging,
- 100% maintenance-free - just connect to the battery terminals and to the AC mains, the charger will do all the work on its own,
- automatic and reliable battery charge control - the charger switches off when a certain voltage is reached,
- multifunctional LED indicator (distinguishing feature of the new V2 version) - the charger has extended signaling of the current status and progress of operation,
- voltage monitoring after charging is completed - automatic resumption of charging in the event of a voltage drop on the battery, also after a voltage loss from the AC network,
- detachable cable equipped with a SAE quick-connector, allows you to adjust the charger to your own needs, standard equipment includes alligator clip tips and ring terminals,
- automatic detection of 6V / 12V batteries,
- The charger is equipped with a set of protections against short circuits, against incorrect connection of poles, against overheating, overloading, overcharging, etc.
The new V2 version of the CBC-1 loader is, above all, increased comfort and safety at work. The new multifunctional LED indicator shows 4 independent operating statuses. The user gets a clear message about the current operating status of the charger.
An additional fuse has been integrated into the output cable with ring connectors. This provides additional protection against short circuits on the side of the output cables, which can be very useful in the case of permanent installation in adverse conditions.
The CBC 1 charger is designed for 6V/12V gel, lead-acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid batteries. Charging is automatic. The charging process, the operation of the charger is signaled by a two-color LED.
How the CBC1 works:
1. Automatic determination of the type, voltage and degree of battery charge.
2. The charger will automatically start recharging if the battery voltage is <13V for a 12V battery and <6.5V for a 6V battery,
3. Charging is automatically terminated when the voltage reaches approx. 14V (for a 12V battery) or approx. 7V (for a 6V battery) - the charger monitors the voltage on the battery and repeats steps 2-3 if necessary.
The CBC-1 provides buffer maintenance battery charging, keeping it ready for operation at any time.
- AC 100-240V, 50-60Hz(50-60 Hz)
- 6V/12V DC (Auto Sensing)
- Gel, Lead-Acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid, EFB, Ca/Ca, Pb, etc.
- above 1.2 Ah
- 14,00(około 14V dla akumulatorów 12V)
- 7,00(około 7V dla akumulatorów 6V)
- 1A
- AC power cable length: approx. 0.5 m
- Total length of connections with crocodile clips or eyelets: approx. 1.8 m
- everActive CBC-1 v2 Automatic Charger
- User manual PL/EN/DE
- Connection with crocodile clips
- Connection with ring terminals
- 5 Ah - 7 h
- 10 Ah - 14 h
- 50 Ah - 70 h
- 100 Ah - 140 h
- AC 100-240V, 50-60Hz(50-60 Hz)
- 6V/12V DC (Auto Sensing)
- Gel, Lead-Acid, AGM, VRLA, VLA, SLA, WET, GEL, Lead-Acid, EFB, Ca/Ca, Pb, etc.
- above 1.2 Ah
- 14,00(około 14V dla akumulatorów 12V)
- 7,00(około 7V dla akumulatorów 6V)
- 1A
- AC power cable length: approx. 0.5 m
- Total length of connections with crocodile clips or eyelets: approx. 1.8 m
- everActive CBC-1 v2 Automatic Charger
- User manual PL/EN/DE
- Connection with crocodile clips
- Connection with ring terminals
- 5 Ah - 7 h
- 10 Ah - 14 h
- 50 Ah - 70 h
- 100 Ah - 140 h
Geodetów 24
80-298 Gdańsk
Polska
E-mail: contact@baltrade.eu