everActive NC1000M Microprocessor Charger
+ everActive SC-200B 2.4A mains charger
+ everActive CC-10 QC3.0 car charger
+ everActive CBB-1.2CB USB-USB-C cable 1.2m
Compact Charger - Easy to Use
The charger is used for charging and maintaining 1-4 pieces of R03 AAA / R6 AA batteries made with Ni-MH and Ni-Cd technology.
Perfect for new generation cells like Eneloop or Ready2Use.
NC-1000M is a significantly refreshed design, the younger brother of the NC-1000 Plus charger. This model is an excellent complement in the professional charger segment.
As in the previous model, numerous improvements have been introduced:
- even easier to use for less experienced users,
- improved charging of cells with increased internal resistance,
- improved charging of "Ready to Use" (LSD) batteries,
- modified discharge mode allowing for checking and memorizing the capacity of any cell 1.2-1.6V - including alkaline and Ni-Zn cells.
A completely new feature in this model is:
- powered by USB Type C - it can be powered by any smartphone charger (recommended min. 5V 2A),
- blue backlit LCD display,
- super compact design - its dimensions are only 110x99x38 [mm]
We invite you to check out the presentation of the everActive NC-1000M charger
New power options from USB-C input
USB Type C input (like in a typical smartphone) allows us to power the charger in countless ways.
There is nothing to stop you from connecting the charger to a power bank, USB output on a laptop, or USB charger in a car - the only condition is the recommended USB output current of 2A. If a weaker power supply is used, the charger will automatically and dynamically adjust the charging current, allowing it to continue the charging process. The 5V voltage and 2A current of the charger allows for achieving a device power of around 10W, which comfortably allows for simultaneously charging 4 1.5V batteries with a current of 1A (requires 6W power).
Key features of the NC 1000M charger:
- very handy and compact - the charger is more streamlined than the BC-700 / BC-1000 / NC-1000 series!,
- despite the multitude of functions, the charger is very easy and intuitive to use,
- four completely independent charging channels - the ability to charge 1-4 pieces of different batteries, from different manufacturers, with different capacities, in different sizes,
- the ability to fully independently set the charging/discharging current for each channel,
- adjustable charging current: 250-500-750-1000 mA for 1-4 pieces of R03 AAA / R6 AA batteries.
The 5V voltage and 2A current of the charger allows for achieving a device power of around 10W, which comfortably allows for simultaneously charging 4 1.5V batteries with a current of 1A (requires 6W power);
- adjustable discharging current: 250-500 mA,
- universal 5V DC/2A USB-C input (no power supply included, only a 50cm cable is attached),
- multifunctional, backlit LCD display, showing the current charging status (voltage), charging time, charging current, counted mAh capacity for the selected cell,
- four operating programs of the charger: CYCLE - refreshing / conditioning with capacity measurement, CHARGE - charging, DISCHARGE - discharging with remaining capacity measurement, TEST - capacity testing,
Contents of the set:
- NC1000M charger packed in original box,
- USB Type C cable 50cm long,
- full, detailed user manual PL/EN/DE.
- everActive SC-200B 2.4A mains charger
- everActive CC-10 QC3.0 car charger
- everActive CBB-1.2CB USB-USB-C cable 1.2m
The set does not include batteries visible in the pictures.
- Ni-MH batteries
- Ni-CD batteries
- 5V DC / 2A / USB-C(brak zasilacza w komplecie)
- 250
- 500
- 750
- 1000
- 250
- 500
- Precisley manufactured charger
- 3 function buttons
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- Microprocessor with ∆V (dV) control
- Thermal - against overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging slot: charging time, working mode, charge / discharge current, counted mAh (capacity), voltage.
- NC1000M charger packed in original box, USB A–USB C cable 50 cm, detailed user manual PL/EN/DE.
- everActive SC-200B 2.4A wall charger
- everActive CC-10 QC3.0 Car Charger
- USB-USB-C cable 1.2m everActive CBB-1.2CB
- 1-4 pieces R03 800mAh - 60 minutes
- 1-4 pieces R03 1000mAh - 70 minutes
- 1-4 pieces R6 2000mAh - 140 minutes
- 1-4 pieces R6 2500mAh - 180 minutes
4 x AAA / R03 everActive Ni-MH 1050 mAh rechargeable batteries ready to use "Professional line"
- excellent batteries at a low price
- 4pcs - factory consumer packaging - blister
- tested performance - real capacity
- pre-charged batteries, next generation made with Ready To Use technology
- highest quality of batteries confirmed by numerous tests
4 x AA / R6 everActive Ni-MH 2600 mAh rechargeable batteries ready to use "Professional line"
- excellent batteries at a low price
- 4pcs. - factory consumer packaging - blister
- tested performance - real capacity
- pre-charged batteries, next generation made with Ready To Use technology
- highest quality of batteries confirmed by numerous tests
everActive SC-200B 1xUSB 2.4A wall charger for phone / smartphone
- high efficiency - fast charging
- USB output: DC 5.0V-2.4A 12.0W
- total output power: 12W
- solid, one-piece housing
everActive SC-200 1xUSB 2.4A wall charger for phone/smartphone
- high efficiency - fast charging
- USB output: DC 5.0V-2.4A 12.0W
- total output power: 12W
- solid, one-piece housing
everActive SC-300 3xUSB 3.4A wall charger for phone / smartphone
- high efficiency - fast charging of 3 devices at once
- USB output: DC 5.0V-3.4A 17.0W
- total output power: 17W
- three widely spaced sockets - allow for hassle-free connection of even thicker USB cables
everActive SC-400 4xUSB 5A wall charger for phone/smartphone
- high efficiency - fast charging of 4 devices at once
- USB output: DC 5.0V-5.0A 25.0W
- total output power: 25W
- four widely spaced sockets - allow for hassle-free connection of even thicker USB cables
- Ni-MH batteries
- Ni-CD batteries
- 5V DC / 2A / USB-C(brak zasilacza w komplecie)
- 250
- 500
- 750
- 1000
- 250
- 500
- Precisley manufactured charger
- 3 function buttons
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- Microprocessor with ∆V (dV) control
- Thermal - against overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging slot: charging time, working mode, charge / discharge current, counted mAh (capacity), voltage.
- NC1000M charger packed in original box, USB A–USB C cable 50 cm, detailed user manual PL/EN/DE.
- everActive SC-200B 2.4A wall charger
- everActive CC-10 QC3.0 Car Charger
- USB-USB-C cable 1.2m everActive CBB-1.2CB
- 1-4 pieces R03 800mAh - 60 minutes
- 1-4 pieces R03 1000mAh - 70 minutes
- 1-4 pieces R6 2000mAh - 140 minutes
- 1-4 pieces R6 2500mAh - 180 minutes
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20