Mactronic Noise 03 lamp set + Mactronic WALL-e BPM-2SL

The set includes:

1) front LED lamp Mactronic Noise 03 XTR ORIGINAL Cree XM-L2 LED - light output up to 750 LUMENS! new optics, battery discharge indicator rechargeable via microUSB port even light beam 5 years warranty!
2) rear light MacTronic WALL-e BPM-2SL 2 POWERFUL RED LEDs 0.5W light visible even in the worst conditions! combination of lens and diffusing lens side visibility: over 180° power supply: 2x AAA/ R03

New version of the MacTronic bicycle flashlight NOISE 03

This compact, rechargeable flashlight is equipped with a super bright LED CREE XM-L2, which allows generating a powerful beam of white light with a strength of 750 lumens in boost mode! This is currently the strongest flashlight in Mactronic's offer! The elliptical light beam used in the flashlight evenly illuminates the surroundings of the cyclist. Additionally, the Side Visibility system has been implemented, making the flashlight visible from the side to other road users.

The new version of Noise is powered by a 18650 battery (the set includes a cell with a capacity of 3400 mAh). Along with the flashlight, we receive a high-quality, easy-to-install dedicated bike mount, a microUSB cable (the flashlight can be charged via a computer's USB port or with a traditional wall charger!) and a 18650 battery with a capacity of 3400 mAh. By removing the NOISE from the mount, it can also be used as a handheld flashlight for hiking, home, workshop, or fishing purposes.

The flashlight has as many as 5 operating modes:
•boost (750 lumens) - mode activated for 30 seconds
•max (540 lumens)- up to 5.5 hours of operation
•medium (270 lumens) - up to 8.5 hours of operation
•low (54 lumens)- up to 41 hours of operation
•flashing mode - up to 30 hours of operation

Switching between modes occurs through successive clicks of the switch. To use the BOOST mode, the switch must be held down for 3 seconds, the flashlight will switch from the currently used mode to BOOST mode, which will remain for 30 seconds, after which it will return to the last used mode. While the flashlight is in operation, the switch is illuminated in three colors that indicate the charge level of the flashlight. Noise also has a mode memory function, meaning it starts in the same mode it was in before being turned off.

Made of high-quality aluminum and plastics, the flashlight's housing is both very light and durable. O-ring seals provide resistance to weather conditions, dust, and splashes. The bike mount is very convenient to install and remove thanks to the use of a quick-release mechanism. The mount fits handlebars with a diameter of 25.4 to 31.8 mm. The set includes a clip for mounting on a helmet.

W A L L e  from MacTronic

If you think that a 'regular' light is too dim and does not give you the right sense of safety while riding a bicycle, then Walle is the light for you - we guarantee you will not be disappointed!

Mactronic Walle is a high-quality rear bicycle light with an original shape and very bright LED light. Equipped with two red LEDs of 0.5W and a system of two lenses: one focusing, the other diffusing, Walle generates light visible in any, even the most difficult weather conditions: in dense fog, in bright sunlight, in heavy rain, or during heavy snowfall. In good conditions, the light is visible from a distance of 1km! The design of the light ensures that we will be seen from afar from the back but also provides excellent visibility from the sides - up to 180°.

BPM-2SL has been enjoying unflagging popularity since its market introduction - below the specification table, we have included sample user reviews found online.

The mount for the seat post is solidly made, and you don't have to worry that the light will disappear somewhere in the bushes while riding off-road. The installation of the light is simple and does not require any tools. Adjusting the tilt vertically is also not a problem. The light can also be useful after removing it from the bike - the housing has a clip on the back for hanging on a backpack, bag, belt, etc. The light itself is small, but its housing is made of quality material and has been sealed. The switch is durable and has also been sealed. It is also possible to mount the light (at your own expense) to a bicycle rack: http://www.rowerowedziecioly.pl/montaz-tylnej-lampki-mactronic-walle-do-bagaznika-rowerowego/.

Walle is powered by two thin batteries (R03 / AAA; both batteries and rechargeable batteries can be used) and has three lighting modes: one steady and two flashing.