Xtar RC1 Darkwalker LED Flashlight
+ eXtreme micro USB 2100mA wall charger.
The set includes:
1) Xtar RC1 Darkwalker LED Flashlight
|
 |
2) eXtreme micro USB 2100mA wall charger.
|
 |
| ad. 1. Xtar RC1 Darkwalker LED Flashlight |
return to the top of the page |
High-quality flashlight
Xtar RC1 Darkwalker
•light output - 450 lumens •light range - 235 meters •OP reflector •tempered glass •aircraft-grade aluminum 6N01 housing •waterproof - IPX8 •power supply - 18650 battery (included) •built-in battery charging module - micro USB port •Li-ion battery charging controlled by a processor three-stage charging TC/CC/CV •reactivation function for deeply discharged cells |
Xtar RC1 Darkwalker is a high-quality compact flashlight with an original Cree XP-G2 LED offering a light output of 450 lumens and a range of 235 meters. Very easy to use - only two operating modes: 450 lumens and 60 lumens. The built-in module allows for quick charging of the battery from any USB charger equipped with a micro USB cable.
The precisely finished, perfectly fitted housing of the RC1 flashlight is made of high-quality 6N01 aircraft-grade aluminum resistant to drops from a height of 1.5m. The design is sealed in 4 places with o-rings providing an IPX8 protection rating (waterproof up to 1m). High-quality contacts and two springs ensure very good battery contact and high shock resistance.
Unlike most competing flashlights, Xtar used a high-quality OP (orange peel) reflector in its design, which generates a much smoother and more pleasant beam compared to a standard (smooth) reflector. The manufacturer also did not skimp on the glass - instead of ordinary glass, tempered glass was used.
The Darkwalker flashlight is powered by a single lithium-ion battery in size 18650 or 18700, and it comes with a protected Xtar battery with a capacity of 2200mAh. RC1 offers two operating modes:
•450 lumens, runtime: 1 hour 50 minutes
•60 lumens, runtime: 15 hours
Additionally, the flashlight switch allows for momentary operation.
Xtar RC1 has a built-in module that allows for charging the battery in the flashlight. Unlike most competing designs that use a non-standard charging socket or a battery with unusual terminals, the Xtar module is equipped with a popular micro USB connector and supports standard 18650 batteries. The module is made using the same technology that Xtar uses in its chargers:
•battery charging is processor-controlled (TC/CC/CV)
•activation function for deeply discharged and '0V' cells
•protection against short circuits and reverse polarity
| Product Data | |
| product code | RC1 / Darkwalker |
| light source | Cree XP-G2 S2 |
| light output | 450 lumens |
| light range | 235 meters |
| power supply | battery-powered |
| battery type | 1x Li-on 18650 / 18700 |
| battery included | yes 2200mAh |
| charging | charging module built into the flashlight - micro USB socket |
| charging current | max 1A |
| charging time | approx. 3 hours for 2200mAh battery |
| acceptable voltage range of the diode driver | 2.75 - 4.2V |
| runtime | 450 lumens - 1 hour 50 minutes, 60 lumens - 15 hours times given for 2200mAh battery |
| flashlight housing | aircraft-grade aluminum 6N01 |
| housing color | black |
| water resistance | yes, protection rating IP68 |
| drop resistance | 1.5m |
| dimensions | length: 143.5 mm, head diameter: 34.5mm, tube diameter: 25.5mm, switch housing diameter: 24.5mm |
| weight | 126g without battery |
| set contents | Xtar RC1 flashlight, 2200mAh battery, micro USB cable, lanyard, spare o-ring |
| warranty | 24 months |
| ad. 2. eXtreme micro USB 2100mA wall charger |
return to the top of the page |
Wall charger with micro USB, 2100 mA. Allows charging of most phones, mp3/mp4 players, and other devices charged via the micro USB port.
With a cable length of 1.4m, it works great in home and office conditions where a standard length cable proves to be too short. It has protections against overcharging and surges.
Technical specifications:
• input voltage: 100-240V AC 50-60Hz
• output voltage: 5V DC
• maximum output current: 2100mA
• DCP / speed charge compatibility: yes
• plug type: micro USB
• cable length: 1.4m
| The charger is compliant with the DCP (dedicated charging port) standard for charging mobile devices, commonly referred to as "speed charge" or "fast charge". DCP-compatible chargers have pins shorted together that normally serve to transmit data. This is necessary for new smartphones to detect the charger’s compliance with the aforementioned standard and to be charged with the optimal current intended for them. Chargers without DCP will charge most smartphones, but they will do so much slower. By purchasing our chargers, you can be sure that your devices will always be charged on time! |  |
5th Floor, No.77 Xinhe Rd, Shangmugu
518000 Shenzhen
Chiny
Email: info@xtar.cc
Telephone: (+86) 755-25507076
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20