everActive NC1000M v2 Microprocessor Charger
Compact Charger - Easy to Use
The charger is used for charging and maintaining 1-4 pieces of R03 AAA / R6 AA batteries made with Ni-MH and Ni-Cd technology.
Perfect for new generation cells like Eneloop or Ready2Use.
NC-1000M v2 is a significantly refreshed design, the younger brother of the NC-1000 Plus charger. This model is an excellent complement in the professional charger segment.
As in the previous model, numerous improvements have been introduced:
- even easier to use for less experienced users,
- improved charging of cells with increased internal resistance,
- improved charging of "Ready to Use" (LSD) batteries,
- modified discharge mode allowing for checking and memorizing the capacity of any cell 1.2-1.6V - including alkaline and Ni-Zn cells.
A completely new feature in this model is:
- powered by USB Type C - it can be powered by any smartphone charger (recommended min. 5V 2A),
- blue backlit LCD display,
- super compact design - its dimensions are only 110x99x38 [mm]
We invite you to check out the presentation of the everActive NC-1000M charger
(the operating principles and handling are the same for the new version V2)
New Power Options from USB-C Input
USB Type C input (like in a typical smartphone) allows us to power the charger in countless ways. The charger does not come with a power supply, but it works perfectly with most power supplies, USB chargers, and factory chargers included with smartphones.
There is also nothing stopping you from connecting the charger to a power bank, USB outputs on a laptop, or USB chargers in a car - the only condition is the recommended output current capacity of 2A. If a weaker power supply is used, the charger will automatically and dynamically adjust the charging current, allowing it to continue the charging process. The 5V voltage and 2A current of the charger allows for achieving a device power of around 10W, which comfortably allows for simultaneously charging 4 1.5V batteries with a current of 1A (requires 6W power).
For those looking for a complementary, dedicated USB power supply for the NC-1000M v2 charger, we particularly recommend everActive models - SC-200, SC-300, SC-400 or higher, which work perfectly with this design.
Key Features of the NC1000M v2 Charger:
- very handy and compact - the charger is more compact than the BC-700 / BC-1000 / NC-1000 series!,
- despite the multitude of functions, the charger is very easy and intuitive to use,
- four completely independent charging channels - the ability to charge 1-4 pieces of different batteries, from different manufacturers, with different capacities, in different sizes,
- the ability to fully independently set the charging/discharging current for each channel,
- adjustable charging current: 250-500-750-1000 mA for 1-4 pieces of R03 AAA / R6 AA batteries;
The 5V voltage and 2A current of the charger allows for achieving a device power of around 10W, which comfortably allows for simultaneously charging 4 1.5V batteries with a current of 1A (requires 6W power);
- adjustable discharging current: 250-500 mA,
- universal 5V DC/2A USB-C input (no power supply included, only a 50cm cable is included),
- multifunctional, backlit LCD display, showing the current charging status (voltage), charging time, charging current, and counted mAh capacity for the selected cell,
- four operating programs of the charger: CYCLE - refreshing / forming with capacity measurement, CHARGE - charging, DISCHARGE - discharging with remaining capacity measurement, TEST - capacity testing,
Contents of the set:
- NC1000M v2 charger packed in original box,
- USB Type C cable 50cm long,
- full, detailed user manual PL/EN/DE.
The standard set does not include a USB power supply or batteries.
- Ni-MH batteries
- Ni-CD batteries
- 5V DC / 2A / USB-C(brak zasilacza w komplecie)
- 250
- 500
- 750
- 1000
- 250
- 500
- Very accurate workmanship of the charger
- 3 function buttons
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging chamber: charging time, working mode, charge/discharge current, counted mAh (capacity), voltage.
- The charger NC1000M packed in the original carton, 50 cm USB A-USB C cable, detailed user manual PL/EN/DE.
- 1-4pcs R03 800mAh - 60mins
- 1-4pcs R03 1000mAh - 70 minutes
- 1-4pcs R6 2000mAh - 140mins
- 1-4pcs R6 2500mAh - 180mins
4 x AAA / R03 everActive Ni-MH 1050 mAh rechargeable batteries ready to use "Professional line"
- excellent batteries at a low price
- 4pcs - factory consumer packaging - blister
- tested performance - real capacity
- pre-charged batteries, next generation made with Ready To Use technology
- highest quality of batteries confirmed by numerous tests
4 x AA / R6 everActive Ni-MH 2600 mAh rechargeable batteries ready to use "Professional line"
- excellent batteries at a low price
- 4pcs. - factory consumer packaging - blister
- tested performance - real capacity
- pre-charged batteries, next generation made with Ready To Use technology
- highest quality of batteries confirmed by numerous tests
everActive SC-200B 1xUSB 2.4A wall charger for phone / smartphone
- high efficiency - fast charging
- USB output: DC 5.0V-2.4A 12.0W
- total output power: 12W
- solid, one-piece housing
everActive SC-200 1xUSB 2.4A wall charger for phone/smartphone
- high efficiency - fast charging
- USB output: DC 5.0V-2.4A 12.0W
- total output power: 12W
- solid, one-piece housing
everActive SC-300 3xUSB 3.4A wall charger for phone / smartphone
- high efficiency - fast charging of 3 devices at once
- USB output: DC 5.0V-3.4A 17.0W
- total output power: 17W
- three widely spaced sockets - allow for hassle-free connection of even thicker USB cables
everActive SC-400 4xUSB 5A wall charger for phone/smartphone
- high efficiency - fast charging of 4 devices at once
- USB output: DC 5.0V-5.0A 25.0W
- total output power: 25W
- four widely spaced sockets - allow for hassle-free connection of even thicker USB cables
- Ni-MH batteries
- Ni-CD batteries
- 5V DC / 2A / USB-C(brak zasilacza w komplecie)
- 250
- 500
- 750
- 1000
- 250
- 500
- Very accurate workmanship of the charger
- 3 function buttons
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging chamber: charging time, working mode, charge/discharge current, counted mAh (capacity), voltage.
- The charger NC1000M packed in the original carton, 50 cm USB A-USB C cable, detailed user manual PL/EN/DE.
- 1-4pcs R03 800mAh - 60mins
- 1-4pcs R03 1000mAh - 70 minutes
- 1-4pcs R6 2000mAh - 140mins
- 1-4pcs R6 2500mAh - 180mins
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20