The original, professional charger of the new generation.
The most advanced model of a charger dedicated to Ni-MH technology from everActive.
2-year warranty - the highest quality of workmanship.
The charger is used for charging and maintenance 1-4pcs. R03 AAA / R6 AA batteries made in Ni-MH and Ni-Cd technology and 1-2 pcs of R14 C / R20 D batteries using an additional adapter (adapter available separately).
Perfect for new generation Eneloop or Ready2Use cells.
The innovation and the highest usability of the Everactive NC-3000 charger is confirmed by a prestigious award - the Gold Medal in the Photo category for the best product. The award was granted by industry professionals on the occasion of the 19th edition of the Film Video Photo fair in Łódź.
We invite you to familiarize yourself with the presentation of the everActive NC-3000 charger
Everactive NC-3000 is a unique design that offers a new quality in the segment of professional chargers.
The NC 3000 is a loader that impresses in terms of functionality, surpassing the capabilities of competing solutions:
- input voltage is 12V DC (in the BC series - 3V) - the most universal - AC power adapter included (standard EU plug), a car adapter is also available for sale,
- possibility of charging/testing/maintaining R14 / R20 batteries using an additional adapter (available separately for sale),
- advanced design of the charger minimizes the effect of heating up the batteries during operation - in addition, as many as 6 thermal sensors watch over the safety of the entire process,
- the charger can detect and charge extremely discharged batteries - even those with a polar voltage of 0.01V - this is a rarity among professional chargers,
- as many as 5 operating modes, including a unique test of the internal resistance of the battery - in a few seconds you can predict whether the installed batteries will be suitable for e.g. flashes or other demanding devices, what's more, the charger, unlike the more expensive MH-C9000, does not block the charging of batteries with high internal resistance - this means that it can charge even heavily used batteries that other chargers consider damaged!,
- modified discharge mode - allows you to check the capacity of e.g. alkaline batteries or check the amount of stored/lost energy (mAh) in the battery after any time.
Features and capabilities of the NC 3000 loader:
- slightly larger than the competition - very convenient to use - the charger allows you to quickly install and remove cells from each slot, while ensuring very good air circulation / cooling,
- microprocessor-controlled with very precise dV (0dV) detection - ensures full charging of the installed batteries,
- despite the multitude of functions, the charger is very easy and intuitive to use,
- four, completely independent charging channels - possibility of charging 1-4 pcs. different batteries, different manufacturers, different capacities, different sizes,
- possibility of fully independent setting of charge/discharge current for each channel,
- possible adjustment of charging current: 200-400-600-800-1000 mA for 1-4 pcs. R03 AAA / R6 AA batteries, additionally 1200-1400 mA available for charging 1-2pcs. Rechargeable batteries
- possible adjustment of the discharge current: 100-200-300-400-500 mA, additionally 600-700 mA available for 1-2pcs. Rechargeable batteries
- universal input voltage 12V DC/1A, power adapter included,
- multifunctional, large, backlit LCD display, showing the current state of charge (voltage), charging time, charging current, counted mAh capacity for each cell or internal resistance of the cell - the selected parameter is displayed simultaneously for all charged cells - there is no need to switch between them as in the MH-C9000,
- five charger operating programs: REFRESH - refresh with capacity measurement [mAh]]/ forming, CHARGE - charging, DISCHARGE - discharging, TEST - capacity testing, QUICK TEST - measuring the internal resistance of the cell (milli ohms).
Set contents:
- NC3000 charger packed in original carton,
- + 4x R03 AKU 4BL ENERGIZER POWER PLUS 700 HR03
- AC 100-240V / 12V DC - 1000mA power adapter with cable approx. 1m,
- user manual PL/EN/DE.
- Ni-MH batteries
- Ni-CD batteries
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- Adjustable - 200-400-600-800-1000 mA
- Adjustable - 1200-1400 mA for 1-2 pcs. Cells
- Adjustable - 100-200-300-400-500 mA
- Adjustable - 600-700 mA for 1-2 pcs. Cells
- 4 function buttons
- Very accurate workmanship. High-quality materials.
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Before the charger overheats
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Measurement of internal resistance in mOhm (Quick test)
- Multi-segment
- Shows the operating parameters of each charging chamber: charging time, operating mode, charge/discharge current, counted mAh (capacity), voltage or internal resistance (in milli ohms)
- 12 V DC / 1000 mA
- AC 100-240V, 50-60Hz
- NC3000 charger packed in original carton, AC 100-240V / 12V DC - 1000mA AC adapter with cable approx. 1m, user manual PL/EN/DE.
- 1-2pcs R03 800mAh - 40min.
- 3-4pcs. R03 800mAh - 60min.
- 1-2pcs. R03 1000mAh - 50min.
- 3-4pcs. R03 1000mAh - 70min.
- 1-2pcs. R6 2000mAh - 100min.
- 3-4pcs. R6 2000mAh - 140min.
- 1-2pcs. R6 2500mAh - 120min.
- 3-4pcs. R6 2500mAh - 180min.
- 1-2pcs. R14 3000mAh - 150min.
- 1-2pcs. R20 5000mAh - 250min.
4 x Energizer R03/AAA Ni-MH 700mAh Power Plus Battery
Markings: HR03/MICRO
Description: Rechargeable Nickel-Metal hyritic
Voltage [V]: 1.2
diameter [mm]: 10.5 in
Height [mm]: 44.5 in
4x everActive R03/AAA Ni-MH 1050 mAh ready to use "Professional line"
4x everActive R6/AA Ni-MH 2600 mAh ready to use "Professional line"
Charger everActive NC-3000
The most advanced charger from everActive
Processor with discharge and measurement of capacitance and a unique test of internal resistanceof the cell,
function of refresh, maintenance, battery formation,
Min. Charging time 4 batteries 2500mAh-3h.
Processor, Ni-MH, Ni-Cd, 1-4x R6/AA, R03/AAA, 1-2x R14/C, R20/D using optional adapter
12V DC Input voltage-AC adaptor included, optional car adaptor available
2 years Warranty
- Ni-MH batteries
- Ni-CD batteries
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- Adjustable - 200-400-600-800-1000 mA
- Adjustable - 1200-1400 mA for 1-2 pcs. Cells
- Adjustable - 100-200-300-400-500 mA
- Adjustable - 600-700 mA for 1-2 pcs. Cells
- 4 function buttons
- Very accurate workmanship. High-quality materials.
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Before the charger overheats
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Measurement of internal resistance in mOhm (Quick test)
- Multi-segment
- Shows the operating parameters of each charging chamber: charging time, operating mode, charge/discharge current, counted mAh (capacity), voltage or internal resistance (in milli ohms)
- 12 V DC / 1000 mA
- AC 100-240V, 50-60Hz
- NC3000 charger packed in original carton, AC 100-240V / 12V DC - 1000mA AC adapter with cable approx. 1m, user manual PL/EN/DE.
- 1-2pcs R03 800mAh - 40min.
- 3-4pcs. R03 800mAh - 60min.
- 1-2pcs. R03 1000mAh - 50min.
- 3-4pcs. R03 1000mAh - 70min.
- 1-2pcs. R6 2000mAh - 100min.
- 3-4pcs. R6 2000mAh - 140min.
- 1-2pcs. R6 2500mAh - 120min.
- 3-4pcs. R6 2500mAh - 180min.
- 1-2pcs. R14 3000mAh - 150min.
- 1-2pcs. R20 5000mAh - 250min.
Geodetów 24
80-298 Gdańsk
Polska
E-mail: contact@baltrade.eu
Birmensdorferstrasse 24
8902 Urdorf ZH
Szwajcaria
E-mail: customersupport@energizer.com
2 rue Jacques Daguerre
92500 Rueil-Malmaison
Francja
E-mail: customersupport@energizer.com