

Key Features
- microprocessor-controlled charging process for Li-ion cells: TC/CC/CV
- fast and full refresh modes
- NiMH charging method: CVSA
- four independent charging channels
- powered by any USB charger (recommended 2A)
- compact size - easy to carry
- open design for better heat dissipation and easier battery removal
- protections: short-circuit, thermal, reverse polarity
- detection of damaged cells, primary batteries
- 0V battery reactivation
Xtar is a renowned manufacturer of high-quality chargers for Li-ion batteries, flashlights, and Li-ion batteries. Xtar products are sold in over 120 countries, including the USA, Germany, Japan, and Russia. For the production of Xtar chargers, only the highest quality materials are used - from the casing material to efficient electronics. All Xtar chargers have CE certification required in European markets.

The Xtar L4 charger features an advanced processor that can distinguish the type of battery installed in it. This allows us to charge any 1.5V Li-ion or Ni-Mh battery in each charger slot. The refined charging algorithm ensures that the battery is always charged to full and in an optimal, safe manner for the specific chemistry of the cell.

The charger Xtar L4 features a reactivation function for deeply discharged cells and cells with a voltage of 0V. Many chargers on the market are unable to charge such batteries. Here, the charger Xtar L4 comes to the rescue, allowing in many cases to 'rescue' such cells. Simply insert the deeply discharged battery into the L4 charger, just like with normal charging - the charger will detect the discharged cell and attempt to reactivate it.
Note! Cells discharged below a certain level may suffer irreversible damage, and their reactivation may be impossible. It is advisable to avoid excessively deep discharging of Li-ion and Ni-MH batteries - this can lead to a significant reduction in their lifespan and capacity or render them completely inoperable.

Clear LCD Display

Compact Size
Your travel companion. The L4 PRO is a sleek and compact design that fits into your pocket or bag. The hollow design not only affects the lower temperature during battery charging. Additionally, it significantly contributes to reducing the weight of the charger! It weighs only 87g.

Like every Xtar charger, the L4 model is protected in every possible way. The most important protections it has are:
- short-circuit
- thermal
- against overcharging
- overcurrent
- against reverse polarity
- detection of primary cells
- Ni-MH batteries
- 1.5V Li-ion batteries protected
- 5V DC((500 - 2100 mA))
- Processor-controlled CC/CV for Li-ion/Li-FePO4
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- 500mA
- 1.5V
- Before the charger overheats
- Against overload / short circuit
- Before reverse polarity of cells
- Charge
- Ładowarka L4 PRO
- USB Type-C Cable
- Manual
4x Xtar R03 / AAA 1.5V Li-ion 750mAh Battery with Protection (BOX)
- nominal voltage: 1.5V
- minimum capacity: 680mAh
- typical capacity: 750mAh
- protected against: discharge, overcharge, overload, short circuit
- number of charge and discharge cycles: over 1200 cycles
- Ni-MH batteries
- 1.5V Li-ion batteries protected
- 5V DC((500 - 2100 mA))
- Processor-controlled CC/CV for Li-ion/Li-FePO4
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- 500mA
- 1.5V
- Before the charger overheats
- Against overload / short circuit
- Before reverse polarity of cells
- Charge
- Ładowarka L4 PRO
- USB Type-C Cable
- Manual
5th Floor, No.77 Xinhe Rd, Shangmugu
518000 Shenzhen
Chiny
Email: info@xtar.cc
Telephone: (+86) 755-25507076
Geodetów 24
80-298 Gdańsk
Polska
Email: contact@baltrade.eu
Telephone: 58 552 20 20








