The charger is used for charging and maintenance of 1-4pcs. R03 AAA / R6 AA batteries made with Ni-MH and Ni-Cd technology.
Perfect for next-generation eneloop or Ready2Use cells.
The NC-1000 PLUS is a new, refreshed version of the highly valued everActive charger.
The design has been further improved by strengthening its high position in the professional charger segment.
The changes made further increase the possibilities and scope of application:
- even easier to use for less experienced users,
- improved charging of cells with increased internal resistance,
- improved charging of "Ready to Use" (LSD) batteries,
- modified discharge mode to check and remember the capacity of any 1.2-1.6V cell - including alkaline cells and Ni-Zn
(similar in performance as in the most expensive MH-C9000 and NC-3000).
Check out the everActive NC-1000 PLUS
We recommend reading - press release.
The NC-1000 is a zero-based design modeled stylistically on the b. popular BC-700/BC-900/BC-1000 models. However, engineers went a step further and eliminated the two biggest drawbacks of the BC series chargers:
- the input voltage is 12V DC (in the BC - 3V series) - the most universal - included ac adapter and car adapter,
- during charging / discharging,you can freely change the parameters for each chamber, the charging current is not limited or dependent on the other previously installed cells (in the BC series the current is limited to the value that we will set for the first battery installed).
In addition, the charger is equipped with a USB 5V/1000mA output for charging mobile devices (phones, etc.).
What's more - the charger, unlike the more expensive MH-C9000 or Ansmann Powerline 4 Pro, has the least restrictive mechanism for detecting batteries with high internal resistance - this means that it can charge even heavily worn batteries that other chargers consider damaged!
| Features and capabilities of the NC 1000 charger: - very handy and compact - the charger is more compact even than the BC-700 / BC-1000 series of chargers!, - despite the multitude of functions, the charger is very easy and intuitive to use, - four completely independent charging channels - 1-4pcs charging capability. different batteries, different manufacturers, different capacities, different sizes, - fully independent setting of the charging/discharging current for each channel, - possible charging current adjustment: 200-500-700-1000 mA for 1-4pcs. R03 AAA / R6 AA batteries, - possible discharge current control: 100-250-350-500mA, - universal input voltage 12V DC/1.5A,included network adapter and car plug-in to the cigarette lighter socket - as few give the possibility of mobile application, - multifunctional LCD display,showing the current charge status (voltage), charging time, charging current, counted mAh capacity for each cell - the selected parameter is displayed simultaneously for all charged cells - no need to switch between them as in mh-c9000, for example, - four charger programs:REFRESH - refresh / forming with capacity measurement,CHARGE - charging, DISCHARGE - discharging with capacity measurement,TEST - capacity testing, - socket, USB output - charger can be used to charge mobile devices - 5V DC /1000mA. |
 |
The contents of the set:
- NC1000 PLUS charger packed in original cardboard,
- AC adapter 100-240V / 12V DC - 1500mA with cable approx. 1m,
- 12V DC car adapter with plug for cigarette lighter socket with cable approx. 1m,
- full, accurate user manual PL/EN/DE.
- Ni-MH batteries
- Ni-CD batteries
- 12 V DC / 1500 mA(W zestawie zasilacz AC 100-240 V i adapter samochodowy)
- 200
- 500
- 700
- 1000
- 100
- 250
- 350
- 500
- Very accurate workmanship of the charger
- 3 function buttons + 4 for independent positioning of each charging compartment
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- USB charger function - 5V DC/1000mA output
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging chamber: charging time, working mode, charge/discharge current, counted mAh (capacity), voltage.
- NC1000 PLUS charger packed in the original carton, AC 100-240V / 12V DC - 1500mA AC adapter with cable approx. 1m, car adapter 12V DC with cigarette lighter plug with cable approx. 1m, complete, detailed user manual PL/EN/DE.
- 1-4pcs R03 800mAh - 60mins
- 1-4pcs R03 1000mAh - 70 minutes
- 1-4pcs R6 2000mAh - 140mins
- 1-4pcs R6 2500mAh - 180mins
- Ni-MH batteries
- Ni-CD batteries
- 12 V DC / 1500 mA(W zestawie zasilacz AC 100-240 V i adapter samochodowy)
- 200
- 500
- 700
- 1000
- 100
- 250
- 350
- 500
- Very accurate workmanship of the charger
- 3 function buttons + 4 for independent positioning of each charging compartment
- SMD microswitch-based buttons with increased sensitivity (better response) and service life
- USB charger function - 5V DC/1000mA output
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Against overload / short circuit
- Detection of damaged and alkaline cells
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Multi-segment
- It shows the operating parameters of each charging chamber: charging time, working mode, charge/discharge current, counted mAh (capacity), voltage.
- NC1000 PLUS charger packed in the original carton, AC 100-240V / 12V DC - 1500mA AC adapter with cable approx. 1m, car adapter 12V DC with cigarette lighter plug with cable approx. 1m, complete, detailed user manual PL/EN/DE.
- 1-4pcs R03 800mAh - 60mins
- 1-4pcs R03 1000mAh - 70 minutes
- 1-4pcs R6 2000mAh - 140mins
- 1-4pcs R6 2500mAh - 180mins