EverActive UC800
It is a multi-channel, universal charger that has as many as ten independent channels! Eight channels are used to charge cylindrical Ni-MH, Li-ion, Li-HV and Li-FePO4 batteries. The other two channels are used to charge 9V batteries (6F22).
The UC800 charger focuses on maximum compatibility - we can charge any Ni-MH rechargeable batteries in sizes: R6 AA, R03 AAA, R14 C, SC, and 9V batteries. In addition, the UC800 also supports Li-ion batteries with a voltage of 3.6/3.7V, their high-voltage alternative - Li-HV, whose rated voltage is 3.85V and Li-FePO4 batteries. In the case of batteries based on Lithium, the charger will support such sizes as: 10440, 14500, 14650, 17500, 17670, 18350, 18500, 18650, 20700, 21700- also protected, 22650, 25500, 26500, 26650 , 16340 R-CR123e . The maximum span of the sledge is up to 76mm, which will ensure the possibility of charging the increasingly popular 20700 and 21700 batteries in the version with electronic protection.
Li-ion/Li-HV and LiFePO4 batteries are charged very accurately using the CC/CV method with a termination of approx. 100mA. This guarantees full safety and full charging of any battery, even heavily degraded or low-capacity.
Ni-MH and 9V batteries are charged using the CC method (constant current) with very precise dV / PVD detection - charging is completed only after reaching the maximum voltage on the battery (the value of this voltage may be different for each battery).
An advanced microprocessor and a number of built-in protections will ensure optimal and safe charging of each battery.
Wide compatibility is not the only advantage of this charger. Large, easy-to-read display with backlight, shows all the most important values in real time:
The charger will handle any other cylindrical battery with a length of 32-76 mm and a maximum diameter of up to 30 mm.
The charger has an input voltage: 12V DC, in the set we get a 12V DC / 3A power supply, optionally a samcohodowy adapter to purchase.
Produkt posiada oznaczenie CE.
- Li-ion batteries 3.6-3.7V, protected (with PCM/PCB)
- Li-ion batteries 3.6-3.7V, unprotected
- Li-ion batteries 3.8-3.85V, protected (with PCM/PCB)
- Li-ion batteries 3.8-3.85V, unprotected
- LiFePO4 Batteries
- Ni-MH batteries
- 6F22/9V batteries
- 12 V DC / 3000 mA
- Processor-controlled CC/CV for Li-ion/Li-FePO4
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- Charge
- Adjustable - 200mA - 2000mA per channel/slot for Li-ion / Li-FePO4(2000mA tylko dla kanałów 1 i 8)
- 200mA - 1000mA per channel / slot for Ni-MH
- 60mA - for 9V batteries
- Li-ion 4.2V ±0,05V
- Li-FePO4 3.65V ±0.05V
- Ni-MH ~1.45V-1.55V dV/PVD
- Li-HV 4.35V ±0,05V
- Before reloading
- Before over-discharging cells
- Against overload / short circuit
- Overload
- Thermal - before overheating of batteries
- Before reverse polarity of cells
- UC-800 charger, 12V/3A AC adapter, user manual
- Li-ion batteries 3.6-3.7V, protected (with PCM/PCB)
- Li-ion batteries 3.6-3.7V, unprotected
- Li-ion batteries 3.8-3.85V, protected (with PCM/PCB)
- Li-ion batteries 3.8-3.85V, unprotected
- LiFePO4 Batteries
- Ni-MH batteries
- 6F22/9V batteries
- 12 V DC / 3000 mA
- Processor-controlled CC/CV for Li-ion/Li-FePO4
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
- Charge
- Adjustable - 200mA - 2000mA per channel/slot for Li-ion / Li-FePO4(2000mA tylko dla kanałów 1 i 8)
- 200mA - 1000mA per channel / slot for Ni-MH
- 60mA - for 9V batteries
- Li-ion 4.2V ±0,05V
- Li-FePO4 3.65V ±0.05V
- Ni-MH ~1.45V-1.55V dV/PVD
- Li-HV 4.35V ±0,05V
- Before reloading
- Before over-discharging cells
- Against overload / short circuit
- Overload
- Thermal - before overheating of batteries
- Before reverse polarity of cells
- UC-800 charger, 12V/3A AC adapter, user manual