EverActive NC3000 Micro-processor charger.
The original, professional new generation loader-a novelty on the Polish market.
The most advanced charger model from everActive.
2 years warranty-Highest quality of workmanship.
www.everactive.pl
The charger is used for charging and maintenance 1-4pcs. R03 AAA/R6 AA batteries made with Ni-MH and Ni-Cd technology and 1-2pcs R14 C/R20 D batteries using an additional adapter (available separately).The original, professional new generation loader-a novelty on the Polish market.
The most advanced charger model from everActive.
2 years warranty-Highest quality of workmanship.
www.everactive.pl
Perfect for the next generation of Eneloop cells or Ready2Use.
Innovation and the highest usability of the charger Everactive NC-3000 confirms the prestigious award - Gold Medal in the category Foto for the best product. The award was awarded by industry professionals on the occasion of the 19TH edition of the Film Video Foto exhibition in Łódź.
| The Everactive NC-3000 is a unique design that offers new quality in the Professional loader segment. The NC 3000 is a loader that is functionally impressive, outweighed by the possibilities of competing solutions: -The input voltage Is 12V DC (IN the BC-3v series)-the most versatile-included AC adapter (standard EU plug), also available car adaptor, - ability to charge/test/maintain R14/R20 batteries using an additional adapter (sold separately), - Advanced loader design minimizes the effect of battery heating during Operation -in addition to 6 thermal sensors ensures the safety of the entire process, -The charger can detect and charge the batteries extremely discharged-even those with a polar voltage of 0.01 V-is a rarity among the professional chargers, - up to 5 operating modes, including a unique internal battery resistance test -in a few seconds you can predict if the installed batteries will be suitable for eg. For speedlights or other demanding devices, what more charger, unlike the MORE expensive MH-C9000, does not block the charging of batteries with high internal resistance -it means that it can recharge even heavily worn Batteries that other chargers consider to be defective!, - Modified Discharge mode -allows you to check the capacity e.g. Alkaline batteries or check the amount of accumulated/lost energy (MAH) in the battery after any time. |
| Features and capabilities of the NC 3000 charger: - slightly larger than the competition-B. Convenient to use-the charger allows you to quickly install and remove the cells from each of the slots, while ensuring B. Good air circulation/cooling, - microprocessor controlled with B. Precision Dv (0DV)-ensures full charging of the batteries being installed, -Despite the multitude of functions, the charger is very easy and intuitive to use, -Four, completely independent charging channels-possibility of charging 1-4pcs. Different batteries, different manufacturers, different capacities, in different sizes, - fully independent setting of charging/discharge current for each channel, - Adjustable charging current: 200-400-600-800-1000 MA for 1-4pcs. R03 AAA/R6 AA batteries, additionally 1200-1400 mA available for 1-2pcs charging. Rechargeable batteries - discharge Current adjustment possible: 100-200-300-400-500 ma, Additional 600-700 ma available for discharge 1-2pcs. Rechargeable batteries - Universal Input Voltage 12V DC/1a, included network adapter, - multifunctional, large BACKLIT LCD display, showing the current state of charge (voltage), charging time, charging current, the counted capacity Of the mAh for each of the cells or resithe |
- Five loader work programs: Refresh-Refresh with capacity Measurement [mAh]]/MOLDING, charge-CHARGING, DISCHARGE-UNLOADING, test-capacity TESTING, QUICK test-measurement of internal resistance of the cell (Nice ohmy).
Kit Contents:
- NC3000 charger packaged in original carton,
- AC Adaptor 100-240V/12V DC-1000mA with cable OK. 1m
- Instructions for use EN/EN/DE.
| Technical data | |
| Supported Batteries | 1-4pcs. R03 AAA/R6 AA, 1-2pcs C R14/D R20 * * Additional adapter required, Ni-MH/Ni-CD of any capacity |
| Charging | Adjustable: 200-400-600-800-1000 mA, 1200-1400 mA for 1-2 PCs. Cells | Discharge current | Adjustable: 100-200-300-400-500 mA, 600-700 mA for 1-2 PCs. Cells |
| Security | Microprocessor with dV control, Battery overheat Protection (4 sensors), Charger Overheat Protection (2 sensors) Overload/short-circuit protection, Detection of damaged and alkaline cells |
| Operating modes | Charge (charging), Discharge (discharge), Refresh (Refresh/liquify), Test (capacity measurement in mAh), Quick Test (internal resistance measurement in mOhm) |
| Lcd | Multi-segment Shows the operating parameters of each charging chamber: charging time, Operating mode, Charging/discharging current, Counted mAh (capacity), Internal voltage or resistance (in Nice OHS) |
| Buttons | 4 function keys, |
| Power | 12V DC/1000mA, supplied AC adaptor 100-240V |
| Dimensions | 147 x 100 x 40 mm |
| Warranty | 2 years old |
| Other | |
3-4pcs. R03 800mAh-60min.
1-2pcs R03 1000mAh-50min.
3-4pcs. R03 1000mAh-70min.
1-2pcs R6 2000mAh-100min.
3-4pcs. R6 2000mAh-140min.
1-2pcs R6 2500mAh-120min.
3-4pcs. R6 2500mAh-180min.
1-2pcs R14 3000mAh-150min.
1-2pcs R20 5000mAh-250min.
Product features Professional charger everActive NC-3000
Producer
everActive
Model / Manufacturer Code
NC3000
Supported battery types
- Ni-MH batteries
- Ni-CD batteries
Supported battery sizes
R03 / AAA(1-4 sztuki),R6 / AA(1-4 sztuki),R14/C(1-2 sztuki - wymagany dodatkowy adapter!),R20/D(1-2 sztuki - wymagany dodatkowy adapter!)
Charging method
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
Charging current in CC (main) phase [mA]
- Adjustable - 200-400-600-800-1000 mA
- Adjustable - 1200-1400 mA for 1-2 pcs. Cells
Discharge Current [mA]
- Adjustable - 100-200-300-400-500 mA
- Adjustable - 600-700 mA for 1-2 pcs. Cells
Other important product features
- 4 function buttons
- Very accurate workmanship. High-quality materials.
Security
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Before the charger overheats
- Against overload / short circuit
- Detection of damaged and alkaline cells
Charger operating modes
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Measurement of internal resistance in mOhm (Quick test)
Features of LCD Display
- Multi-segment
- Shows the operating parameters of each charging chamber: charging time, operating mode, charge/discharge current, counted mAh (capacity), voltage or internal resistance (in milli ohms)
Input voltage
- 12 V DC / 1000 mA
- AC 100-240V, 50-60Hz
Dimensions (W x D x H) [mm]
100 x 147 x 40
Contents
- NC3000 charger packed in original carton, AC 100-240V / 12V DC - 1000mA AC adapter with cable approx. 1m, user manual PL/EN/DE.
Warranty [miesiące]
24
Approximate charging times
- 1-2pcs R03 800mAh - 40min.
- 3-4pcs. R03 800mAh - 60min.
- 1-2pcs. R03 1000mAh - 50min.
- 3-4pcs. R03 1000mAh - 70min.
- 1-2pcs. R6 2000mAh - 100min.
- 3-4pcs. R6 2000mAh - 140min.
- 1-2pcs. R6 2500mAh - 120min.
- 3-4pcs. R6 2500mAh - 180min.
- 1-2pcs. R14 3000mAh - 150min.
- 1-2pcs. R20 5000mAh - 250min.
4x everActive R03/AAA Ni-MH 1050 mAh ready to use "Professional line"
4,00 € brutto
4,00 € netto
4x everActive R6/AA Ni-MH 2600 mAh ready to use "Professional line"
5,80 € brutto
5,80 € netto
Car adaptor, DC 12V cable for everActive Chargers NC-109, NC-3000, UC-4000
Allows you to use multiple chargers and other RTV equipment in your car,
Universal DC Jack Plug 5.5/2.1 mm fits most chargers with 12V DC input voltage
Universal DC Jack Plug 5.5/2.1 mm fits most chargers with 12V DC input voltage
0,98 € brutto
0,98 € netto
Product features Professional charger everActive NC-3000
Producer
everActive
Model / Manufacturer Code
NC3000
Supported battery types
- Ni-MH batteries
- Ni-CD batteries
Supported battery sizes
R03 / AAA(1-4 sztuki),R6 / AA(1-4 sztuki),R14/C(1-2 sztuki - wymagany dodatkowy adapter!),R20/D(1-2 sztuki - wymagany dodatkowy adapter!)
Charging method
- Processor-controlled CC with -ΔV/0ΔV/PVD for Ni-MH
Charging current in CC (main) phase [mA]
- Adjustable - 200-400-600-800-1000 mA
- Adjustable - 1200-1400 mA for 1-2 pcs. Cells
Discharge Current [mA]
- Adjustable - 100-200-300-400-500 mA
- Adjustable - 600-700 mA for 1-2 pcs. Cells
Other important product features
- 4 function buttons
- Very accurate workmanship. High-quality materials.
Security
- Microprocessor with ∆V (dV) control
- Thermal - before overheating of batteries
- Before the charger overheats
- Against overload / short circuit
- Detection of damaged and alkaline cells
Charger operating modes
- Charge
- Discharge
- Refresh/Cycle
- Capacity measurement in mAh (Test)
- Measurement of internal resistance in mOhm (Quick test)
Features of LCD Display
- Multi-segment
- Shows the operating parameters of each charging chamber: charging time, operating mode, charge/discharge current, counted mAh (capacity), voltage or internal resistance (in milli ohms)
Input voltage
- 12 V DC / 1000 mA
- AC 100-240V, 50-60Hz
Dimensions (W x D x H) [mm]
100 x 147 x 40
Contents
- NC3000 charger packed in original carton, AC 100-240V / 12V DC - 1000mA AC adapter with cable approx. 1m, user manual PL/EN/DE.
Warranty [miesiące]
24
Approximate charging times
- 1-2pcs R03 800mAh - 40min.
- 3-4pcs. R03 800mAh - 60min.
- 1-2pcs. R03 1000mAh - 50min.
- 3-4pcs. R03 1000mAh - 70min.
- 1-2pcs. R6 2000mAh - 100min.
- 3-4pcs. R6 2000mAh - 140min.
- 1-2pcs. R6 2500mAh - 120min.
- 3-4pcs. R6 2500mAh - 180min.
- 1-2pcs. R14 3000mAh - 150min.
- 1-2pcs. R20 5000mAh - 250min.