Four-channel compact processor charger
Xtar ET4S for 1.5V and NiMH Li-ion batteries
1.5V Li-ion batteries are available >>here<<
Key features
- PROCESSOR-controlled Li-ion cell charging process: CC/CV
- NiMH charging method: 0△V and -△V
- four independent charging channels
- powered by any USB charger (2A recommended)
- small dimensions - easy to carry
- protection: short-circuit, thermal, against reverse polarity
The Xtar ET4S charger has an advanced processor that is able to distinguish the type of battery installed in it. Thanks to this, in each charger socket we can charge any Li-ion 1.5V or Ni-Mh battery. A refined charging algorithm will ensure that the battery is always fully charged and in an optimal, safe way for a given cell chemistry.
The compact size and the lid of the charging chamber are 2 quite important advantages of the BC4 charger. Thanks to the combination of these 2 things, we get a mobile charger.
Like any Xtara charger, the ET4S is protected in every possible way. The most important security it has are:
- short-circuit
- Thermal
- against overcharging
- overcurrent
- against reverse polarity
Produkt posiada oznaczenie CE.
- Akumulatory Ni-MH
- Akumulatory Li-ion 1,5V zabezpieczone
- 5 V DC((500 - 2100 mA))
- Sterowana procesorowo CC/CV dla Li-ion/Li-FePO4
- Sterowana procesorowo CC z -ΔV/0ΔV/PVD dla Ni-MH
- 500mA
- 1,5V
- Przed przegrzaniem ładowarki
- Przed przeciążeniem / zwarciem
- Przed odwrotną polaryzacją ogniw
- Ładowanie (Charge)
- Ładowarka ET4S
- Kabel microUSB
- smyczka
4x Rechargeable Battery Xtar R03 / AAA 1,5V Li-ion 680mAh with Protection (BOX)
Nominal voltage: 1.5V
Minimum capacity: 680mAh
typical capacity: 750mAh
dimensions: 10,3mm x 44,5mm
protected against: discharge, overcharge, overload, short circuit
number of charge and discharge cycles: more than 1200 cycles
SET OF 4 PIECES packed in a plastic container
- Akumulatory Ni-MH
- Akumulatory Li-ion 1,5V zabezpieczone
- 5 V DC((500 - 2100 mA))
- Sterowana procesorowo CC/CV dla Li-ion/Li-FePO4
- Sterowana procesorowo CC z -ΔV/0ΔV/PVD dla Ni-MH
- 500mA
- 1,5V
- Przed przegrzaniem ładowarki
- Przed przeciążeniem / zwarciem
- Przed odwrotną polaryzacją ogniw
- Ładowanie (Charge)
- Ładowarka ET4S
- Kabel microUSB
- smyczka