- Two-component epoxy putty ideal for sealing, filling, reconstructing, repairing and joining: metals, wood, concrete, glass, marble, etc.
- The plastic mass acquires the hardness of metal... within 10min
- After 1 hour, it can be sawn, drilled and machined with ordinary tools
- does not shrink or stretch, is a good electrical insulator, does not contain solvents
- does not run off vertical surfaces
- resistant to acids and solvents
- does not lose its properties over time
- POXILINA has a hygienic certificate PZH B.BK.60110.1438.2022 allowing the use of pipes used for the transmission of cold and hot water intended for consumption for sealing and repair.
How to use Poxilin:
- A very important stage of repairs with Poxiline is the proper preparation of the surface - it should be properly cleaned and smoothed with sandpaper to remove the remains of rust and loose fragments.
- We then recommend cleaning the surface with an alcohol-based agent or turpentine to remove any grease or polishing residue.
- Then: cut off, knead and apply!
- After applying the product, wait at least an hour before putting the combination under pressure or loads.
- After performing the Poxilina repair, wait an hour before turning on the water valve. The bonding reaches its maximum resistance after 24 hours.
- The rest of the Poxiline that has not been mixed can be wrapped up thoroughly and stored away for later.
- Poxiline can withstand temperatures of up to 80 C without changing its properties.
- REMARK: Poxilina is not intended for repairs of gas pipes.
Recommendations and precautions
- When preparing the pipe for repair, don't forget to close the valve and dry the surface thoroughly.
- Before applying the Poxilina mass for 10 minutes, we recommend smoothing the surface with sandpaper and cleaning it with alcohol or turpentine to remove grease, rust and abrasion residues.
- If you want to seal a hole in the pipe, the effect will be better when Poxilina gets inside the hole.
- When the repair is complete, wash your hands with plenty of soap and water.
- After drying, Poxilina can be painted with various types of paint, and it can also be drilled, polished and sawn.
Warnings
- Poxiline is not to be used on the surface of the body of humans and/or animals, nor is it intended to come into contact with food.
- Prolonged contact of the product with the skin may cause irritation, we recommend using it with gloves.
- If you work without gloves, remember to wash your hands immediately with plenty of soap and water.
- It contains epoxy resin and tertiary amines.
- Do not ingest. Keep out of reach of children and pets.
Product features Two-component Poxilina epoxy putty 70g
Producent
Poxilina
Zastosowanie
do uszczelniania, wypełniania, rekonstrukcji, naprawy i łączenia
Product features Two-component Poxilina epoxy putty 70g
Producent
Poxilina
Zastosowanie
do uszczelniania, wypełniania, rekonstrukcji, naprawy i łączenia