Fast charger for cylindrical batteries Li-ion 16650/18650 Xtar EC1
Only for high voltage cells 3, 8V/3, 85V
LED light showing the charging status
Three-stage charging method: TC/CC/CV
Reactivation of deeply discharged cells and 0V cells
charging Current: 0, 7a | Charging Voltage: 4, 35V
Powered by Micro USB-no power supply included
Protection: Thermal, short-circuit, before the reverse insertion of the battery
|
Professional, compact fast processor charger In a small enclosure, a fully professional processor loader with a three-stage charging process TC/CC/CVis concealed. It loads 3.8/3, 85V Li-ion cells with any capacity in sizes 16650/18650.
Xtar EC1
For Li-ion batteries in sizes 16650/18650- High voltage
• Processor-controlled three-stage charging process TC/CC/CV
• High charging current- 0, 7a
• Powered by any micro USB charger (min. 0, 7A)
• Compact size-Easy to carry
• Reactivation function of deeply discharged cells
• Protection: Short-circuit, thermal, reverse polarity
What Is THE TC/CC/CV charging method? It is a three-step process of loading Li-ion cells to keep the cell in good condition by charging the right current at each stage and completing the charging process at the right moment.
The various stages of the TC/CC/CV process are:
• TC phase: Cells discharged below 2, 9V are ' awake ' to lower currents.
• CC phase: When 2, 9V is reached, the cell is loaded with a constant current of 0, 7A.
• CV phase: When the cell is already nearly charged, the charger switches to a decreasing current charge until it reaches a voltage of 4, 2V on the cell. After reaching 4, 2V the charging process is complete-the battery is fully charged.
The Xtar EC1 Charger has a function of reactivating deeply discharged cells and cells with a Voltage Of 0v. Many chargers on the market are not able to charge such batteries. Here with the help comes the charger Xtar EC1, which in many cases allows you to ' resave ' such cells. Just insert a deeply discharged battery into the EC1 charger, as with normal charging, the charger detects the unloaded link and attempts to reactivate it. Attention! Cells unloaded below a certain level are irreversible and reactivated may not be possible. Avoid too deep discharge of Li-ion batteries-this can lead to a significant reduction in their durability and capacity or to their total malfunction.
Chargers from other manufacturers can significantly increase the temperature of the cells being charged during charging. Excessive heating of the cells can cause them to wear more quickly. When designing the EC1 charger, Xtar went one step further from the competition, solving this problem easily: the power supply from an external power supply was applied. This ensures that the charging temperature in the EC1 battery rises by up to 15 degrees.
Supplied with the Xtar EC1 Charger, we receive a micro USB cable. The power supply is not Included In the set. Any charger with a micro USB cable, for example, is enough to power the charger. Phone, or USB port or a computer with a free USB socket. The recommended minimum charger power is 0, 7A (700mA).
Product data Manufacturer
Input current
Recommended 5V 0, 7A
In the CC phase
Loading
Short Circuit
Before the battery is reversed
Micro USB Cable