Charger/Power Bank for cylindrical batteries Li-ion 18650/20700/21700/26650 Xtar PB2S Yellow

Producer code: PB2S

Professional processor Charger for Li-ion 18650/20700/21700/26650 cells with Power Bank function
Three-stage charging method: TC/CC/CV
Two independent charging channels
Reactivation of deeply discharged cells and 0V cells
Charging current: 2x2a/2x1A/1x2a | Charging voltage: 4, 2V
Efficient converter-efficiency 92%
Magnetic lid for charging chamber
Powered by USB TYPE C QC 3.0 and PD 3.0 -(no power supply included)
Protection: Thermal, short-circuit, before the reverse insertion of the battery

availability
Brak
price 10,00 €
Qty:
Brand: Xtar

Professional, compact processor/Power Bank charger
Xtar PB2S Yellow
For Li-ion batteries in sizes 18650/20700/21700/26650

funkcja power bank
Key Features
• Processor-controlled three-stage charging process TC/CC/CV
• Automatically selected charging current 2x 1A/1X 2A
• Two USB-TYPA and TYPE-C (IN/OUT) outputs
• Two independent charging channels + built-in balancer
• Powered by USB TYPE C socket with QC 3.0 and PD 3.0
• Compact size-Easy to carry
• Magnetic Charging compartment Cover
• Reactivation function of deeply discharged cells
• Protection: Short-circuit, thermal, reverse polarity
Xtar is a renowned manufacturer of high quality Li-ion rechargeable battery chargers, flashlights and lithium batteries. Xtar products are sold in more than 120 countries, including mines IN the USA, Germany, Japan and Russia. For the production of Chargers Xtar uses the highest quality materials-from the plastic casing to the efficient electronics. All Xtar Chargers HAVE CE certification required on European markets.

In a small enclosure, a fully professional processor charger with Power Bank function is concealed with a three-stage charging process TC/CC/CV. It loads 3.6/3.7 v Li-ion cells with any capacity in size 18650/20700/21700/26650. The intelligent built-in balancer controls the charging and discharge process. It significantly extends the life of the cells. The charger always starts by charging a more discharged cell. After reaching a similar charging level, it starts to charge both batteries simultaneously. The same happens in case of discharge. The charger starts unloading from the more charged cell, when the level of the charge is leveled, it begins to unload both batteries simultaneously (Power Bank function).

What Is THE TC/CC/CV charging method? It is a three-step process of loading Li-ion cells to keep the cell in good condition by charging the right current at each stage and completing the charging process at the right moment.
The various stages of the TC/CC/CV process are:
• TC phase: Cells discharged below 2, 9V are ' awake ' to lower currents.
• CC phase: When 2, 9V is reached, the cell is loaded with a constant current of 2x2A/2x1A/1x2A.
• CV phase: When the cell is already nearly charged, the charger switches to a decreasing current charge until it reaches a voltage of 4, 2V on the cell. After reaching 4, 2V the charging process is complete-the battery is fully charged.

Batteries with a voltage of 4, 1V or higher are treated by the charger as charged. To recharge such a full battery, please insert it into the charger before powering it in. When left in the charger, the charged batteries will be subjected to a natural self-discharge process. Charging will resume when the battery voltage drops below 4, 1V.

The Xtar PB2S Charger has a function of reactivating deeply discharged cells and cells with a Voltage Of 0v. Many chargers on the market are not able to charge such accumulatorsThat. Here with the help comes the charger Xtar PB2S, which in many cases allows you to ' resave ' such cells. Just insert a deeply discharged battery into the PB2S charger, as with normal charging, the charger detects the unloaded link and attempts to reactivate it.

Attention! Cells unloaded below a certain level are irreversible and reactivated may not be possible. Avoid too deep discharge of Li-ion batteries-this can lead to a significant reduction in their durability and capacity or to their total malfunction.

Chargers from other manufacturers can significantly increase the temperature of the cells being charged during charging. Excessive heating of the cells can cause them to wear more quickly. When designing the PB2S charger, Xtar went one step further from the competition, solving this problem easily: the power supply from an external power supply was applied. This ensures that the charging temperature in the PB2S battery rises by up to 15 degrees.

Supplied with the Xtar PB2S Charger We GET a USB type C Cable. The power supply is not included in the kit. Any charger with a USB socket, for example, is enough to power the charger. From your phone or a computer with a free USB port. The recommended charger supports QC 3.0/PD 3.0 to take full advantage of the charger. It is possible to use a charger with less power but in this case the charging time will be prolonged.

Product data
Manufacturer Xtar
Charger Model PB2S
Supported Battery types Li-Ion 3.6 batteries-3, 7V
Supported Battery Sizes 18650/20700/21700/26650
Maximum battery length 70mm
Input voltage and
Input current
Compatible with QC 3.0 and PD 3.0 (5V/2A | 9V/2A | 12V/1.5 A)
Power connector TYPE C
Power supply included Not
Recommended power supply Minimum 5V 2A,
Recommended QC 3.0/PD 3.0 compliant
Charging method Processor-controlled TC/CC/CV
Charging
In the CC phase
2x 2A/2x 1A/1x 2A
End Voltage
Loading
4, 2V ± 0, 05V
Current of terminations 120mA
Additional functions Reactivation of deeply discharged cells and cells 0V
Security
D style = ' padding-left: 15px ' > thermal,
Short Circuit
Before the battery is reversedDimensions 125 x 58 x 28mmWeight 85gKit contents PB2S Charger,
USB TYPE C-TYPE A Cable,Warranty 24 months old




Produkt posiada oznaczenie CE.

Website uses cookies. Rules for their use, along with information on setting cookies in web browsers, are described in detail in the Cookies policy. By using this site you agree to its terms.
OK, close