VC2 PLUS is a professional processor loader with three-stage charging process TC/CC/CV and LCD display. It charges 1-2 Li-ion 3.6/3, 7V and Ni-MH cells with any capacity in the sizes AAA/R03, AA/R6, R14/C, 10440, 14500, 14650, 16340, 17500, 17670, 18350, 18500, 18650, 18700, 20700, 21700, 22650, 25500, 26650.

The illuminated LCD display of the charger Xtar VC2 PLUS shows you the current status of the charger: charging the batteries in percentage and remaining time to the end of the charge. These are estimates that update as the load PROGRESLS.

What Is THE TC/CC/CV charging method? It is a three-step process of loading Li-ion cells to keep the cell in good condition by charging the right current at each stage and completing the charging process at the right moment.
The various stages of the TC/CC/CV process are:
• TC phase: Cells discharged below 2, 9V are ' awake ' to lower currents.
• CC phase: When 2, 9V is reached, the cell is loaded with a constant current of 0, 05A to 0, 5A (depending on the power source being used).
• CV phase: When the cell is already nearly charged, the charger switches to a decreasing current charge until it reaches a voltage of 4, 2V on the cell. After reaching 4, 2V the charging process is complete-the battery is fully charged.

When left in the charger, the charged batteries will be subjected to a natural self-discharge process. Charging will resume when the battery voltage drops below 3.9 v.

The Xtar VC2 PLUS Charger has a function of reactivating deeply discharged cells and cells with a Voltage Of 0v. Many chargers on the market are not able to charge such batteries. Here with the help comes the charger Xtar VC2 PLUS, which in many cases allows you to ' resave ' such cells. Just insert a deeply discharged battery into the VC2 PLUS charger, as with normal charging, the charger detects the unloaded link and attempts to reactivate it. Attention! Cells unloaded below a certain level are irreversible and reactivated may not be possible. Avoid too deep discharge of Li-ion batteries-this can lead to a significant reduction in their durability and capacity or to their total malfunction.

Xtar VC2 + has an additional power bank function with 5V USB output with a maximum power of 1A. Any Li-ion battery with a minimum capacity of 2200mAh can be used as a power source. To use the Power Bank function, disconnect the charger from the power supply and place the battery in the channel labeled "USB Output". The battery discharge status is indicated by an indicator on the display. Attention! The USB output is electronically protected